DRAGONLOCK MINIATURES: Lizardfolk Set 1

3D PRINTER MINIATURES ARE HERE! This set features .stl files for five different 28mm scale lizardfolk miniatures, all designed to print as-is without additional printing supports and minimal cleanup (each miniature in the photo had less than 1 minute of trimwork done, mainly stringing.) The best part about 3D .stl minis is once you buy the set, you can print massive armies and never run out (average plastic cost per mini is about 5 cents each!)

While print settings will vary between brand of printer and the specific type of filament being used, here are our print settings on a Printrbot Play with Hatchbox 1.75mm silver PLA:

100 micron

190 Temp

25mm/sec speed

.8mm wall thickness with a .4mm nozzle (i.e. 2 shells)

6 top/bottom layers

10-15% infill

No rafts or supports